Novin Industrial Development
Language:
English
Persian
منو

Services



CMM-ret.jpg Iranian industries is very good area for selling second hand and stocked Measuring Machine, the customers always looking for lower price, and it will finally finished with selection a second hand old machine.
Almost all of second hand CMMs imported into Iran needs rebuilding and retrofitting, because their software and hardware are out of date and they have not any support and after sell services, also some of Imported Second Hand Machines (ISHM) are in different languages interface same as Turkish or French and customers looking for English then they ask for new software, also some of them need rebuilding in structure for example they need some new air bearings and granite axis or motor or mechanical drive systems.
This type of business needs experience in mechanic fields electrical field and calibration measuring machines, according to our company departments we have arranged three teams for rebuilding and retrofit in each team there is four persons:

     1- Mechanical engineer
     2- Electrical engineer
     3- Measuring machine calibration expert
     4- Mechanical technician

These four persons will repair and rebuild the machine with their experience in the customer site.
They have following abilities:

     1- Mechanical adjustment of the axis for better movement.
     2- Mechanical adjustment for Axis perpendicularity.
     3- Replacing air bearing with new one.
     4- Uninstall old scales and Installation on new ones.
     5- Rebuild or repair of Z axis balancer.
     6- Design and develop new mechanical drive system.
     7- Repair old mechanical drive system.
     8- Repair or change axis pneumatic brake systems.
     9- Change the wiring system.
     10- Change limit switches.
     11- Installation of scale signal convertor for makes scale signals compatible with new control.
     12- Change probe system and wiring.
     13- Repair or replace axis motors.
     14- Repair or replace axis electrical drive systems.
     15- Repair or replace main control system.
     16- Repair or replace I/O Board.
     17- Design and develop new electrical board for make old system compatible with new controls.
     18- Changing software.
     19- Calibrate with laser interferometer of Renishaw with 21 parameters.
     20- Calibration according to ISO 10360_2
     21- Training customer’s user persons to measuring parts with new software and working with control system.
     22- Training customer’s repair and maintenance persons to handling small errors of systems.

All of these sequences will take at least 6 week to run a fully new CMM with OLD structure.
About 17 rebuild and retrofit system has been done by our engineers yet here there is a short list of them:
Retrofitted CMM in Iran:

     1- Olivetti CMM in Farasanat Shomal Company has retrofitted and calibrated with Aberlink 3D S/W for measuring Peugeot and Pride axel parts.
     2- Merlin CMM in Sepas Company for scanning plastic injection dies has Retrofitter and calibrated with IMS S/W.
     3- Olivetti CMM in Rad Ravesh Company for measuring Automotive Parts has Retrofitted and calibrated with Aberlink 3D S/W.
     4- Poli 2 column Layout Machine in SAIPA for measuring body fixture of KIA Pride have Retrofitted and calibrated with Metrolog XG6 and measure twin system.
     5- LK G80C Bridge type Machine in Beshel company motor has retrofitted and calibrated with Metrolog XG5 for measuring KIA Pride motor and other automotive parts.
     6- LK G90 Bridge type Machine in Beshel motor company has retrofitted with Aberlink 3D S/W for measuring Peugeot motor cylinder block.
     7- LK G80S Bridge type Machine in Beshel motor company has retrofitted with Aberlink 3D software for measuring Gear boxes of Peugeot and Citroen.
     8- DEA CMM Bridge type Machine in Kerman Khodro Company has retrofitted with Aberlink 3D software for measuring automotive parts.
     9- Mitutoyo CMM bridge type Machine in IHDM of SAIPA Company has retrofitted with Aberlink 3D software for measuring variety of parts.
     9- Johanson CMM bridge type Machine in Novin Sanjesh Company has Calibrated with interferometric Laser and Metrolog XG5 software for measuring variety of parts.
     9- IMS 2 column Layout type Machine in IKMT Of Iran Khodro Company has retrofitted and calibrated with interferometric Laser and PC DMIS software for measuring variety of parts.

Some of Installed CMM in Iran:

     1- LK G80 for Mehvar khodro for measuring Benz axel parts.
     2- LK G80K for Saipa Press for measuring KIA Pride body parts and dies.
     3- LK Revolution for Iran Khodro Peugeot for measuring body parts.
     4- LK Evolution for scanning fixture of Peugeot body parts.
     5- Aberlink Axiom for Farasanat shomal for measuring automotive parts.
     6- LK G80C for sanat pajohan for measuring Pride KIA motor parts.
     7- Aberlink Maxim for Novin Company for measuring and scanning refrigerator and automotive parts.
     8- Aberlink Zenith for Kaveh Gostar Company for measuring axel part of KIA Pride and Peugeot.
     9- Aberlink Zenith for Gatee sazan Tabriz Company for measuring rail ways parts.
     10- Aberlink Axiom for Sanat pajohan Company in golpayegan for measuring cylinder head of KIA Pride.
     11- 2 of Renishaw cyclone scanning Machine for Kosha Company for scanning plastic injection dies.
     12- Renishaw cyclone scanning Machine for Alonit Company for scanning Aluminum casting dies.
     13- Aberlink Axiom for Alonit Company measuring Automotive Aluminum parts.
     13- Trimek Sea model for Farayand Negar Shokooh Company measuring Automotive Fixtures of Saipa Body parts.

And a lot of other inspection inline equipment for checking, measuring and scanning parts.