Novin Industrial Development
Language:
English
Persian
منو

Products



According to advancement of industrial presses in speed and accuracy, metal sheet placement by hand with this speed and accuracy is totally impossible.
Our Development department has developed servo feeder system in two different types:

1- Close loop Servo system for open loop feeding control
With this type of feeder customers can set feeding position and feeding speed with following specs:

o Feeding accuracy: 0.01 mm
o Feeding variation: from 0.05 to 4000mm in each step
o Feeding speed: 2mm/s to 4000mm/s
o Speed accuracy: 5% Feed
o Maximum thickness: 16mm
o Minimum thickness: 0.5mm
o Maximum width: 600mm
o Minimum width: 50mm
o Servo power: 3.5 KW
o Acceleration and deceleration adjustment: Available.
o No sheet prevent: Yes
o Overload Prevent: Available
o EMG Loop: Available
o No Feeding sensor: Not Available
o Less Feeding Prevent: Not Available
o Programming Mode: Available.
o Control Box: Include
o Sheet Backlash Prevent: Not Available
o Manual Jog forward and backward: Available
o Setting Panel: Digital Numerator
o Synchronization with press: With a setting timer

2- Close loop Servo system and close loop feeding control
This type of feeder can measure the length of feeding and sheet backlash and it can stop the sequence in case of slipping metal sheet. It has following specs:

o Feeding accuracy: 0.01 mm
o Feeding variation: from 0.05 to 4000mm in each step
o Feeding speed: 2mm/s to 4000mm/s
o Speed accuracy: 1% Feed
o Maximum thickness: 16mm
o Minimum thickness: 0.5mm
o Maximum width: 600mm
o Minimum width: 50mm
o Servo power: 3.5 KW
o Acceleration and deceleration adjustment: Available.
o No sheet prevent: Yes
o Overload Prevent: Available
o EMG Loop: Available
o No Feeding sensor: Available
o Less Feeding Prevent: Available
o Programming Mode: Available.
o Control Box: Include
o Sheet Backlash Prevent: Available
o Manual Jog forward and backward: Available
o Setting Panel: HMI Base
o Synchronization with press: With a setting timer